x

uPVC Casing Pipes

Sagar uPVC Casing Pipes are manufactured according to ISI 12818:2010 for the transportation of potable groundwater from tubewells and borewells, especially in farms and rural areas. The casing pipes meet all the highest industry standards and specifications for quality, safety, and long-term durability for use in pumps for retrieving water from an underground waterbed. Sagar uPVC Casing pipes meets all the highest industry standards for safety and long term durability and are also more resillient, non - corrossive and very economical compared to metal pipes. It provides satey and protection to the bore well.

Enquire Now
Download Catalogue
  • Features
  • Applications
  • Benefits
  • Technical Details

Features

  • Manufactured from special PVC compound having extra toughness.
  • Anti corrosive. PVC being an inert material most of the chemicals found in soil and water do not affect the casing and screen.
  • Continuous ribs increase permeability by keeping gravel pack away from slot opening.
  • Chemical rehabilitation possible when chocking occurs due to encrustation.
  • Horizontal slots enable laminar flow into the well reducing well entrance losses.
  • Higher permeability reduces draw down and results in saving in pumping energy.
  • Slot width right from 0.2mm to 3.00 mm can be provided
  • Light in weight
  • The socket and spigot with suitable thread make them easy to install and requires no welding equipments and generator
  • Manufactured conforming to IS:12818, DIN 4925 (part I to III) and ASTM F 480.
  • Casing and screen available from 1ΒΌ" dia to 16" dia.
  • All accessories for well completion available.

Applications:

  • Most suitable for use with SAGAR submersible column pipe
  • Suitable for use as shiftable pumping system
  • Suitable for use as pumping mains
Note:
  • Selection of classes of casing pipe depends on capacity of pump along with length of pipe installation, land etc.

Benefits:

Pre-COS

Our product made from PVC, CPVC, PE & PPR raw materials which differ as follows from many of the pipes, hoses and fittings commercially available.

  • Higher mechanical stability.
  • Improved chemical stability.
  • Higher softening points.
  • Greater residual strength at high temperatures.
  • Higher compression strength.
  • Greater safety due to material stability.
  • Environment stress crack, corrosion, frost, kink & rot resistant.
Interior smoothness

Our product has outstanding interior smoothness and is thus optimized for flow. They have following advantages:

  • Very high delivery rate.
  • Low pressure loss.
  • Reduction of blower power requirements.
  • Lower operating costs.
Lead Free

As lead is certainly toxic, many questions have raised regarding lead content in pipes & fittings, harming environment or human health hence being hygienic conscious the pipes & fittings are specially featured lead free.

Hygienic

The pipes & fittings being free from corrosion & negative biological effect, taste & odor nature, it does not change the water quality.

Industrial

Our pipes, hoses & fittings are specially design for industrial usage. Our product gives best performance while use in the factory. Due to high durability & flexibility our pipes & hoses are famous for industrial usage.

Shock Proof

The pipe is non conductor of heat & electricity hence, they have following advantages:

  • Reduce heat loss.
  • No insulation required.
Quick assembly & maintenance free

The pipes, hoses & fittings are light in weight which results in extensive saving of time and laboring being Abrasion/Chemical resistance, free from rusting, pitting or scaling and maintenance-free.

Strong & Stiff

The pipes are specially designed for desire application which meets the required results as follows:

  • Superior strength with stiffness.
  • Flexible Compared to strength & stiffness.
Chemical Resistance

The pipes & hoses have special characteristics which offers excellent resistance to great number of chemical like strong mineral acids, bases, & toxic chemicals.

SAGAR® Strong n Safe™ Shallow Well Plain Casing Pipes (CS) to as per IS:12818

Nominal Dia. Outside Dia. mm Wall Thickness (mm) Max. Outside Dia.
Over Socket mm
(inch) {mm} Min. Max. Min. Max.
6 150 165.0 165.4 5.7 6.5 174
7 175 200.0 200.5 7.0 7.8 211
8 200 225.0 225.5 7.6 8.8 238
10 250 280.0 280.5 9.6 11.0 292
12 300 330.0 330.6 11.2 13.3 346
14 350 400.0 400.7 14.0 15.5 420
16 400 450.0 450.8 16.0 17.5 470
Read More

SAGAR® Medium Well Plain Casing Pipe (CM) as per IS12818 & DIN 4925

Nominal Dia. Outside Dia. mm Wall Thickness (mm) Max. Outside Dia.
Over Socket mm
(inch) {mm} Min. Max. Min. Max.
1¼ 35 42.0 42.2 3.5 4.0 46
1½ 40 48.0 48.2 3.5 4.0 52
2 50 60.0 60.2 4.0 4.6 65
3 80 88.0 88.3 4.0 4.6 94
4 100 113.0 113.3 5.0 5.7 120
4½ 115 125.0 125.3 5.0 5.7 132
5 125 140.0 140.4 6.5 7.4 150
6 150 165.0 165.4 7.5 8.5 178
7 175 200.0 200.5 8.8 9.8 215
8 200 225.0 225.5 10.0 11.2 243
10 250 280.0 280.5 12.5 14.0 298
12 300 330.0 330.6 14.5 16.2 352
14 350 400.0 400.7 17.5 19.5 428
16 400 450.0 450.8 19.5 21.7 479

SAGAR® Deep Well Plain Casing Pipe (CD) as per IS:12818 DIN 4925

Nominal Dia. Outside Dia. mm Wall Thickness (mm) Max. Outside Dia.
Over Socket mm
(inch) {mm} Min. Max. Min. Max.
4 100 113.0 113.3 7.0 7.9 125
4½ 115 125.0 125.3 7.5 8.5 137
5 125 140.0 140.4 8.0 9.0 152
6 150 165.0 165.5 9.5 10.7 180
7 175 200.0 200.5 11.8 13.6 217
8 200 225.0 225.5 13.0 14.8 247
10 250 280.0 280.5 16.0 17.6 304
12 300 330.0 330.6 19.0 21.0 359
14 350 400.0 400.7 21.5 23.9 433

SAGAR® Deep Well Ribbed Screens (RDS) as Per Is : 12818

Nominal Size DN. Mean Outer Dia. mm Outer Dia. mm Mean Outer Dia.
Over Connection		 Wall Thickness mm
  Min. Max. Min. Max. Max. Min. Max.
100 117.0 117.3 116.8 117.4 129.0 7.0 7.9
115 129.0 129.3 128.9 129.4 141.0 7.5 8.5
125 144.0 144.4 143.7 144.5 156.0 8.0 9.0
150 169.0 169.4 168.6 169.6 184.0 9.5 10.7
175 204.0 204.5 203.6 204.6 221.0 11.8 13.6
200 229.0 229.5 228.5 229.8 251.0 13.0 14.8
250 284.0 284.5 283.4 284.8 309.0 16.0 17.6
300 334.0 334.6 333.3 335.0 363.0 19.0 21.0
350 404.0 404.7 403.2 405.2 437.0 21.5 23.9
400 454.0 454.8 453.1 456.3 494.0 23.5 26.1

SAGAR® Medium well Ribbed Screen (RMS) Pipes as per to IS:12818 and DIN 4925 Part 1 to

Nominal Dia. (RS) Outside Dia. mm Wall Thickness (under ribs) mm Max. Outside Dia.
Over Socket mm
(inch) {mm} Min. Max. Min. Max.
1¼ 35 46.0 46.2 3.5 4.0 50
1½ 40 52.0 52.2 3.5 4.0 56
2 50 64.0 64.2 4.0 4.6 69
3 80 92.0 92.3 4.0 4.6 98
4 100 117.0 117.3 5.0 5.7 124
4½ 115 129.0 129.3 5.0 5.7 136
5 125 144.0 144.4 6.5 7.3 154
6 150 169.0 169.4 7.5 8.5 182
7 175 204.0 204.5 8.8 9.8 219
8 200 229.0 229.5 10.0 11.2 247
10 250 284.0 284.5 12.5 14.0 302
12 300 334.0 334.6 14.5 16.2 356
14 350 404.0 404.7 17.5 19.5 432

SAGAR® Medium well Ribbed Screen (PMS) Pipes as per to IS:12818 and DIN 4925

Nominal Size DN. Mean Outer Dia. mm Outer Dia. mm Mean Outer Dia. Over Connection Wall Thickness mm
  Min. Max. Min. Max. Max. Min. Max.
200 225.0 225.5 224.5 225.8 243.0 10.0 11.2
250 280.0 280.5 279.4 280.8 298.0 12.5 14.0
300 330.0 330.6 329.3 331.0 352.0 14.5 16.2
350 400.0 400.7 399.2 401.2 428.0 17.5 19.5
400 450.0 450.8 449.1 451.3 479.0 19.5 21.7

SAGAR® Medium well Ribbed Screen (PDS) Pipes as per to IS:12818 and DIN 4925

Nominal Size DN. Mean Outer Dia. mm Outer Dia. mm Mean Outer Dia. Over Connection Wall Thickness mm
  Min. Max. Min. Max. Max. Min. Max.
200 225.0 225.5 224.5 225.8 247.0 13.0 14.8
250 280.0 280.5 279.4 280.8 304.0 16.0 17.6
300 330.0 330.6 329.3 331.0 359.0 19.0 21.0
350 400.0 400.7 399.2 401.2 433.0 21.5 23.9
400 450.0 450.8 449.1 451.3 490.0 23.5 26.1

Slot Width Available on SAGAR PVC Screen Pipes conforming to DIN 4925

Slot Width Min. mm 0.2 0.3 0.5 0.75 1.0 1.5 2.0 3.0
Tolerance   +0.06 +0.08 +0.01 +0.02 +0.02 +0.02 +0.02 +0.03
Slot Width Inch no. 8 12 20 30 40 60 80 100
Read Less

Subscribe Our Newsletter