Sagar Drop master emittings pipes are manufactured from the world's most precision industry of switzerland. The company has technology from THE MACHINES, switzerland which produce emitting pipes with precision and help farmers to increse their yields with less water. Drop master Emitting pipes are manufactured from special grade polyethylene. Resistant to Ultra Violet (UV) radiation and other environmental effects. Drop master Emitting Pipe passes through stringent quality tests confirming to Indian and International Standards.
Features:
- Seamless drip tape with drippers permanently fixed inside. Seamless construction improves ability to withstand pressure fluctuations.
- Marked with two parallel white stripes. It also helps to ensure upright positioning of the dripper.
- Manufactured from special grade, virgin polymer ensuring close dimensional tolerance and higher strength even at lower wall thickness.
- Manufactured with the most modern, state-of-the-art equipment. It’s computerized continuous online quality control ensures reliable quality and consistent performance.
- Hydraulically designed turbulent flow path emitter with wide cross sectional area and precision inlet filter that makes it truly clog resistant drip tape.
- Precision laser drilled outlet holes.
- Extremely low manufacturing coefficient of variation, CVm ensures high field emission uniformity.
- Available in 12, 16, 17 and 22 mm nominal diameter as per metric standard. 5/8" & 7/8" nominal diameter as per US standard.
- Available in five discharge rates of 0.8, 1.2, 1.6, 2 and 4 lph at nominal operating pressure of 0.7 kg/cm² as per metric standard. 0.19, 0.27, 0.36, 0.47 and 0.89 gph at nominal operating pressure of 10 psi as per US standard.
- Available in wall thickness ranging from 6mil to 25mil (0.2mm to 0.63mm).
- Available in standard dripper spacing of 20, 30, 40, 50, 60, 75, 90 and 100 cm. Any other spacing and group spacings are available on demand.
- Specially designed fittings are available. Please refer to 'Poly Fittings & Accessories' page.
- Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water.